An epoxy system is a two-part material consisting of an epoxy resin and a hardener (curing agent). When combined in the correct ratio, a chemical reaction cures the system into a hard, high-performance thermoset plastic.
Yes. Epoxy bonds well to cured polyester fibreglass, making it suitable for repair and overlay work on existing polyester structures. The reverse — applying polyester over epoxy — does not work reliably.
Cure time depends on the hardener selected and ambient temperature. Fast systems may demould in 4–6 hours; slow systems may require 24–72 hours before handling. Full mechanical properties develop with a post-cure at elevated temperature.
A sticky surface after cure indicates amine blush (surface contamination from reaction with atmospheric moisture) or an incorrect mix ratio. Amine blush can be washed off with water and a cloth. An incorrect mix ratio cannot be fixed — the laminate must be replaced.
| CODE | DESCRIPTION | APPLICATION | GEL TIME | VIEW |
|---|---|---|---|---|
| DP101/368 | Epoxy Fast Hardener | 100:15 Fast cure | 15 - 20 min | |
| DP101/319 | Epoxy Medium Cure | 100:25 Medium Cure Epoxy | 30 - 45 min | |
| DP101/309 | Epoxy Slow Cure | 100:60 Slower Cure | 45 - 65 min |
| CODE | DESCRIPTION | APPLICATION | VIEW |
|---|---|---|---|
| VE 2960 RIVA | Infusion resin | ||
| VELO 309V | Low viscosity Infusion resin | ||
| VE 2960 AT | Laminating resin |
